1 Scope
This standard specifies a series of test methods for the high peel strength of adhesive tapes.
This standard is applicable for the determination of the peel strength of adhesive tapes, used for quality control of adhesive tape products.
2 Normative References
The following documents are indispensable for the application of this document. For dated references, only the version cited applies. For undated references, the latest version (including all amendments) applies.
GB/T2523-2008 Method for measuring the surface roughness and peak count of cold-rolled metal sheets (strips)
GB/T3280-2007 Stainless steel cold-rolled steel plates and strips
GB/T22396 Terminology for rubber products
3 Terms and Definitions
The terms and definitions defined in GB/T22396 and the following apply to this document.
3.1
Peel Strength
The force required to peel a unit width of adhesive tape from a specific adhesive surface at a certain angle and rate. Unit: N/cm
3.2
Test Assembly
The assembly formed by pasting the adhesive tape to be tested on a steel plate.
3.3
Surface Average Roughness
The arithmetic average deviation of the roughness profile. That is, the arithmetic average of the absolute values of the roughness profile deviations over the sampling length.
4 Classification
This standard method can be divided into the following types according to different objects, temperatures, and peel angles of adhesive tape adhesion:
