PW-CO1440-T2 Drying Baking Wax Melting And Sterilization Large Oven For Laboratory Use

    PW-CO1440-T2 Drying Baking Wax Melting And Sterilization Large Oven For Laboratory Use

    Introduction

    It is  used for drying, baking, wax melting and sterilization in industrial and mining enterprises, laboratory rooms, scientific research units, etc

    Box structure size

    1、Inner dimension: 120(W)×120(H)×100(D)±1cm;
    2、The controller is located on the top of the machine, the double doors open from right to left;

    3、The inner material is mirror stainless steel plate thickness of 1.0mm;

    4、The outer material is SECC steel plate thickness ≥1.2mm powder baking paint treatment;
    5、The thermal insulation material is 100K high-density glass rock wool with a thickness of 100mm, which has good thermal insulation and maximizes the temperature insulation.
    6、There are two layers inside, two stainless steel grids (mesh shape);
    7、The tight material is high temperature resistant silica gel strip;8、Glassless window;
    9、Equipped with movable casters and fixed feet.

    Supply unit

    Voltage: 380V three-phase    Power: 8KW

    Parameters and temperature control system

    1. The temperature control is PID microcomputer, which can automatically calculate, PV/SV can be displayed at the same time, and it can be set by pressing buttons. Any temperature value between normal temperature and maximum temperature can be set (Taiwan Pine);
    2. Timer setting, 99.9 seconds-999 hours (optionally set hours, minutes, seconds,)
    a. Continuous use
    b. When the temperature is up, the time is up to cut off the heating current (the alarm device ends)
    3. CA(K) TYPE temperature sensor head;
    4. The output is 3-32V;
    5. The current controller is controlled by the solid state relay to control the power output, and the temperature control PID microcomputer contact output, the signal automatically adjusts the output ratio, and can accurately control the temperature overshoot accuracy (Taiwan Yangming);
    6. The heating material is stainless steel heater;
    7. Temperature range RT~200℃;
    8. Heating rate: RT-100℃ for about 15 minutes; 9. Control accuracy: ±1℃;
    9. Uniformity of temperature distribution in the box: ±4℃ (no load).

    Air supply system

    1. Forced horizontal air circulation, the air source is driven by the circulating motor to drive the wind wheel through the electric heater, and the hot air is sent from the air duct to the inside of the oven, and the hot air after use is sucked into the air duct to become the air source to recirculate heating, thereby reducing Energy loss and ensure the temperature uniformity in the box, when the temperature drops caused by the opening of the door, the air circulation system can also be used to quickly restore the temperature value of the working state.
    2. The motor is a long-shaft high temperature resistant type with a power of 1hp/50Hz (Taiwan).
    3. The 10.5-inch wind wheel is a multi-blade turbine type.
    4. Adjustable wind deflector is installed inside.
    5. There is an air inlet at the rear and two sets of air outlets on the top, and the exhaust air volume is adjustable.

    Safety protection system

    1. Over-temperature protection system: When the temperature is out of control due to external forces, the system will automatically stop the power supply of the whole machine when the set temperature exceeds 10 degrees, thereby protecting the safety of your products and machines;
    2. Fuse and overcurrent protection system: When the power of the whole machine exceeds the normal power due to high voltage or other reasons, the system will automatically cut off the power to protect the industrial control components of the whole machine from being damaged;
    3. Motor overheating protection to prevent motor damage caused by motor overheating, phase sequence protection.

    PW-CO1440-T2 Drying Baking Wax Melting And Sterilization Large Oven For Laboratory Use

    PW-CO1440-T2 Drying Baking Wax Melting And Sterilization Large Oven For Laboratory Use

    Company Profile

     

    PW Instruments (Guangdong) Co., Ltd is committed to helping customers reach their goals in terms of quality and cost-effectiveness by providing the latest testing instruments as per internationally recognized standards. With an extensive global supply chain in some countries, we are trusted by industry leaders, research scientists and laboratory management managers.

    PW was established in March 2007 by Mr. Peiwu Liu, a senior expert in the field of innovative R/D. Our production base is located in a world-renowned manufacturing area in Dongguan city, Guangdong Province, where the technology boom has attracted a large number of professional engineers and elites.

    In order to better serve customers in East China, PW Instruments (Shanghai) Co., Ltd. was established in Shanghai, and an instrument exhibition hall and testing center were set up in Suzhou Industrial Park. It is an enterprise integrating R&D, production, sales, import and export. It has been recognized by customers for many years. Through years of operation, the company has gathered a group of talents with considerable qualifications in the industry and accumulated a large number of high-quality customers at home and abroad in the past decade.

    PW has its own industrial design capabilities, the appearance and texture of products are good, the measurement and control system department has independent research and development capabilities, and the performance of the developed measurement and control system is stable. It is designed and developed completely in accordance with various national standards, international standards, and industry standards such as GB, ASTM, AATSS, JIS, EN, etc., and is currently used by users in various industries around the world.

    At present, the products developed, produced and sold by the company are divided into three parts: material testing machine division, reliability test chamber division, and measurement division. The products are universal material testing machine, customized tensile and compression testing machine, peel strength testing machine, physical testing equipment, image measuring instrument, 2.5-dimensional, three-dimensional coordinate measuring machine, three-dimensional scanner, full-size measuring instrument, and rapid size measuring instrument, precision oven, high and low temperature test box, constant temperature and humidity test box, rapid temperature change test box, thermal shock test box, walk-in constant temperature and humidity room, UV ultraviolet weathering test box, xenon lamp weathering test box, full sets of test equipment for new energy lithium batteries, etc.

    The products are widely used in automobiles and parts, 3C, smart wear, new energy lithium batteries, molds, casting die-casting, furniture, tape, film, die cutting, packaging, aerospace, scientific research institutions, quality inspection, drug inspection and other fields.

    At this moment, we will not be complacent about our achievements. We will work harder than ever to provide customers with affordable and effective solutions through extensive communication with potential customers around the world to stimulate vitality and enrich experience.

    PW is going to fulfill the ambition and vision to be one of the best manufacturers in the world under the powerful leadership of General Manager Liu.

    PW Test

    PW Test

    Wordshop Equipments

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    Company Pictures

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    Machine Video

    Corporate Culture

    Vision: Become a world-renowned instrument manufacturer
    Mission: Provide customers with high-quality testing equipment
    Values: Customer satisfaction is our aim.

      Reviews

      There are no reviews yet.

      Be the first to review “PW-CO1440-T2 Drying Baking Wax Melting And Sterilization Large Oven For Laboratory Use”

      Your email address will not be published. Required fields are marked *

      Scroll to Top