PW-CTS2-19-55A Air-cooled Thermal Shock Test Chamber For Sale

PW-CTS2-19-55A R&D two-box air-cooled thermal shock test chamber is a small 19L thermal shock tester specifically designed for the R&D department.

PW-CTS2-19-55A Air-cooled Thermal Shock Test Chamber

Introduction:

PW-CTS2-19-55A R & D two-box air-cooled thermal shock test chamber is launched for the materials research and development sector 19L small cold and thermal shock test chamber, self-research temperature balance technology, different from the traditional use of high-power refrigeration against high-power heating freezing balance technology.

Take the on-off refrigeration energy regulation technology – central controller according to the different temperature points to control the size of the cooling capacity to achieve temperature static balance, while allowing the operation of equipment is always in a relatively low-power state, energy saving and environmental protection.

Performance: (air-cooled, refers to the room temperature at +25 ℃, no load)    

1. High temperature tank impact range: +40 ℃ ~ +150 ℃
2. Low temperature tank impact range: -10 ℃ ~ -55 ℃
3.Temperature uniformity: ≤±2℃
4. Temperature fluctuation: ≤ ± 0.5℃.
5. High and low temperature shock constant temperature time: 5 min
6. Basket transfer time: within 5 seconds
(Temperature performance test is measured according to the relevant provisions of IEC60068-3 standard; the sensor is placed at the unit air outlet)

Specification:

1. Studio size: W325 × H240 × D240 mm (internal box size can be customized)
2. External dimensions: approx. W750 × H1810 × D1120mm
3. Box structure: with independent product testing area, high temperature heat storage area, low temperature storage area
4. Inner box material: stainless steel plate (SUS 304#)
5. Outer box material: steel plate baking paint
6. Insulation material: high temperature tank: 24k glass wool
Low temperature tank: PU foam + glass wool
7. Heater: bare wire type electric heater
8. Air supply circulation system
a.TECO motor
b.Stainless steel elongated shaft
c.Multi-wing fan (SIROCCO FAN)
9. Door: single piece door, 1 type of high temperature tank and 1 type of low temperature tank
a. Flat recessed handle
b.Back knob: SUS 304#
c.Silicone foam strip
10. Test hole: 1 x ψ50mm hole in the body, 1 x silicone plug head.
11. Test material placement shelf: stainless steel SUS 304# 2 pieces of shelf tray.
12. Mobile castors: including mobile castors (with foot cup).
13. Drive: cylinder drive.
14. Tightening: silicone foam tightening.

PW-CTS2-19-55A Air-cooled Thermal Shock Test Chamber

 

Company Profile

PW Instruments (Guangdong) Co., Ltd is committed to helping customers reach their goals in terms of quality and cost-effectiveness by providing the latest testing instruments as per internationally recognized standards. With an extensive global supply chain in some countries, we are trusted by industry leaders, research scientists and laboratory management managers.

PW was established in March 2007 by Mr. Peiwu Liu, a senior expert in the field of innovative R/D. Our production base is located in a world-renowned manufacturing area in Dongguan city, Guangdong Province, where the technology boom has attracted a large number of professional engineers and elites.

In order to better serve customers in East China, PW Instruments (Shanghai) Co., Ltd. was established in Shanghai, and an instrument exhibition hall and testing center were set up in Suzhou Industrial Park. It is an enterprise integrating R&D, production, sales, import and export. It has been recognized by customers for many years. Through years of operation, the company has gathered a group of talents with considerable qualifications in the industry and accumulated a large number of high-quality customers at home and abroad in the past decade.

PW has its own industrial design capabilities, the appearance and texture of products are good, the measurement and control system department has independent research and development capabilities, and the performance of the developed measurement and control system is stable. It is designed and developed completely in accordance with various national standards, international standards, and industry standards such as GB, ASTM, AATSS, JIS, EN, etc., and is currently used by users in various industries around the world.

At present, the products developed, produced and sold by the company are divided into three parts: material testing machine division, reliability test chamber division, and measurement division. The products are universal material testing machine, customized tensile and compression testing machine, peel strength testing machine, physical testing equipment, image measuring instrument, 2.5-dimensional, three-dimensional coordinate measuring machine, three-dimensional scanner, full-size measuring instrument, and rapid size measuring instrument, precision oven, high and low temperature test box, constant temperature and humidity test box, rapid temperature change test box, thermal shock test box, walk-in constant temperature and humidity room, UV ultraviolet weathering test box, xenon lamp weathering test box, full sets of test equipment for new energy lithium batteries, etc.

The products are widely used in automobiles and parts, 3C, smart wear, new energy lithium batteries, molds, casting die-casting, furniture, tape, film, die cutting, packaging, aerospace, scientific research institutions, quality inspection, drug inspection and other fields.

At this moment, we will not be complacent about our achievements. We will work harder than ever to provide customers with affordable and effective solutions through extensive communication with potential customers around the world to stimulate vitality and enrich experience.

PW is going to fulfill the ambition and vision to be one of the best manufacturers in the world under the powerful leadership of General Manager Liu.

PW Test

PW Test

Wordshop Equipments

PW Test

PW Test

PW Test

PW Test

PW Test

PW Test

PW Test

PW Test

Company Pictures

PW Test

PW Test

PW Test

PW Test

PW Test

Machine Video

Corporate Culture

Vision: Become a world-renowned instrument manufacturer
Mission: Provide customers with high-quality testing equipment
Values: Customer satisfaction is our aim.

    Reviews

    There are no reviews yet.

    Be the first to review “PW-CTS2-19-55A Air-cooled Thermal Shock Test Chamber For Sale”

    Your email address will not be published. Required fields are marked *

    Scroll to Top