PW-PCT-350 China Factory PCT High Pressure Accelerated Aging Test Chamber

    PW-PCT-350 China Factory PCT High Pressure Accelerated Aging Test Chamber

    Use

    PCT high-pressure accelerated aging test box is used to test the performance test of products in storage, transportation and use under high temperature, high temperature, high humidity and pressure climatic environment. It is mainly used for electrical and electronic products, components, parts, and metal materials. And its magnetic materials are tested under the climatic conditions of high temperature, high temperature, high humidity and pressure to test the physical and other related properties of the product. After the test, the performance of the product can be judged through verification to meet the requirements for product design , Improvement, verification and factory inspection use.

    Box structure

    a. Outer wall material: stainless steel plate SUS304#; thickness: 1.2mm.
    b. Inner wall material: stainless steel plate SUS304#; thickness: 3.0mm
    c. Box insulation material: glass fiber.
    d. Door insulation material: fiberglass.
    e. Round inner box, stainless steel round inner box structure, in line with industrial safety standards, can prevent condensation and dripping during the test.
    f. The arc liner, stainless steel arc type liner design, can avoid the direct impact of steam overheating.

    g. Precise design, good airtightness, low water consumption, and continuous operation for 999H every time the automatic water is added;
    h. Automatic access control, back pressure type non-external force flat door, automatic temperature and pressure safety detection, automatic access control lock control system, advanced safety door handle design (door handle is safer without force), test door when the inner box has greater than normal pressure Will be protected by back pressure and cannot be opened; protect the safety of operators.
    i. Patented packing, when the pressure of the inner box is greater, the packing will have back pressure to make it more closely integrated with the box body, which is different from the traditional extrusion type that depends on external force from the outside to the inside. When the pressure inside the box is 1Kg/ When cm2, the box door will suck inward with a suction of 1Kg/cm2 to achieve a sealing effect; when the pressure in the box is 2Kg/cm2, the box door will suck inward with a suction of 2Kg/cm2 to achieve a sealing effect ; The tightness of the box door is completely determined by the pressure inside the box, so as to better protect the box door and prolong its life.
    j. Before the start of the experiment, the equipment will automatically extract the unsaturated air from the original inner box, so that each test can ensure that the test sample is completed in a saturated vapor environment to ensure the consistency of the test results.

    Control System

    a. Microcomputer saturated vapor LED digital temperature controller + time LED display controller, pressure pointer display meter.
    b. This system complies with the reliability test specifications of high-pressure accelerated aging: CNS, ISO, JIS, ASTM, DIN, BS, IEC, NACE, UL, MIL…
    c. Control object: microcomputer + P.I.D. + S.S.R automatic calculation to control the saturated steam temperature.
    d. Control method: microcomputer control

    Sample limit

    This test equipment prohibits:
    Test or storage of samples of flammable, explosive and volatile substances;
    Test or storage of samples of corrosive substances;
    Testing or storage of biological samples;
    Test or storage of strong electromagnetic emission source samples;

    Technical Parameters

    Product name PCT High pressure accelerated aging test chamber
    Model PCT-35
    Nominal internal volume 43L
    Inner box size 350×450 mm(φ×D) circular laboratory
    Dimensions W900 XD800 XH1300mm
    Weight About 100kg
    Test environment conditions When the ambient temperature is +25℃, the relative humidity is ≤85%, and there is no sample in the test box
    Temperature range 100℃~135℃ can be set arbitrarily
    Humidity range 100%RH. (Saturated vapor humidity)
    Pressure range 1.5~3.0Kg/cm2 (including 1atm)
    Time limit 0 ~ 9999H
    Heating time RT ~ 120℃ within 35 minutes
    Boost time 0.0Kg/cm2 ~ 1.00Kg/cm2 within 35 minutes
    Temperature resolution accuracy Temperature: 0.1℃
    Temperature control accuracy Temperature: ±0.5℃
    Pressure control accuracy ±0.2Kg/cm2
    Temperature uniformity Temperature: ±2%
    Cycle way Water vapor natural convection circulation method
    Box door Back pressure type no external force plane door
    Control panel Temperature controller display, time setting device, operation switch, pressure gauge, alarm indicator
    Power distribution control cabinet Power distribution board, exhaust fan
    Heater Titanium alloy heating tube
    Power cord hole Located on the back of the box
    Temperature Controller Imported LED display precision temperature controller
    Screen display function Direct display of temperature setting (SV) and actual (PV) values
    Test box Adjustable over-temperature and low-water level protection; limit over-temperature of adjustment channel; over-voltage protection; leakage protection; overload and short-circuit protection
    Installation site The ground is flat and well ventilated; there is no strong vibration around the equipment; there is no flammable, explosive, corrosive substances and dust around the equipment; proper use and maintenance space is left around the equipment
    Environmental conditions Temperature: 5℃~30℃; Relative humidity: ≤85%; Air pressure: 86kPa~106kPa
    Power supply  AC220V 1 phase 3 wires
    Allowable voltage fluctuation range: ±5%
    Allowable frequency fluctuation range: 50 Hz ± 0.5 Hz
    The grounding resistance of the protective earth wire is less than 4Ω
    The user is required to independently configure the corresponding capacity air switch for the equipment at the installation site
    Installed power About 2.5 Kw
    Maximum current 10 A
    Air switch 32 A

    PW-PCT-350 China Factory PCT High Pressure Accelerated Aging Test Chamber

    Company Profile

    PW Instruments (Guangdong) Co., Ltd is committed to helping customers reach their goals in terms of quality and cost-effectiveness by providing the latest testing instruments as per internationally recognized standards. With an extensive global supply chain in some countries, we are trusted by industry leaders, research scientists and laboratory management managers.

    PW was established in March 2007 by Mr. Peiwu Liu, a senior expert in the field of innovative R/D. Our production base is located in a world-renowned manufacturing area in Dongguan city, Guangdong Province, where the technology boom has attracted a large number of professional engineers and elites.

    In order to better serve customers in East China, PW Instruments (Shanghai) Co., Ltd. was established in Shanghai, and an instrument exhibition hall and testing center were set up in Suzhou Industrial Park. It is an enterprise integrating R&D, production, sales, import and export. It has been recognized by customers for many years. Through years of operation, the company has gathered a group of talents with considerable qualifications in the industry and accumulated a large number of high-quality customers at home and abroad in the past decade.

    PW has its own industrial design capabilities, the appearance and texture of products are good, the measurement and control system department has independent research and development capabilities, and the performance of the developed measurement and control system is stable. It is designed and developed completely in accordance with various national standards, international standards, and industry standards such as GB, ASTM, AATSS, JIS, EN, etc., and is currently used by users in various industries around the world.

    At present, the products developed, produced and sold by the company are divided into three parts: material testing machine division, reliability test chamber division, and measurement division. The products are universal material testing machine, customized tensile and compression testing machine, peel strength testing machine, physical testing equipment, image measuring instrument, 2.5-dimensional, three-dimensional coordinate measuring machine, three-dimensional scanner, full-size measuring instrument, and rapid size measuring instrument, precision oven, high and low temperature test box, constant temperature and humidity test box, rapid temperature change test box, thermal shock test box, walk-in constant temperature and humidity room, UV ultraviolet weathering test box, xenon lamp weathering test box, full sets of test equipment for new energy lithium batteries, etc.

    The products are widely used in automobiles and parts, 3C, smart wear, new energy lithium batteries, molds, casting die-casting, furniture, tape, film, die cutting, packaging, aerospace, scientific research institutions, quality inspection, drug inspection and other fields.

    At this moment, we will not be complacent about our achievements. We will work harder than ever to provide customers with affordable and effective solutions through extensive communication with potential customers around the world to stimulate vitality and enrich experience.

    PW is going to fulfill the ambition and vision to be one of the best manufacturers in the world under the powerful leadership of General Manager Liu.

    PW Test

    PW Test

    Wordshop Equipments

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    Company Pictures

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    Machine Video

    Corporate Culture

    Vision: Become a world-renowned instrument manufacturer
    Mission: Provide customers with high-quality testing equipment
    Values: Customer satisfaction is our aim.

      Reviews

      There are no reviews yet.

      Be the first to review “PW-PCT-350 China Factory PCT High Pressure Accelerated Aging Test Chamber”

      Your email address will not be published. Required fields are marked *

      Scroll to Top