PW-RX3 Series Guangdong Yuelian Rain Test Device Chamber Equipment Factory Produce

    PW-RX3 Series Yuelian Rain Test Device Chamber Equipment Factory Produce

    Use

    Pendulum rain shower device is suitable for outdoor lighting, communication products, signal devices and automotive lamps and other products to do shell protection level test. This equipment artificially simulates rain test, excluding rain with strong wind speed, and does not consider the temperature and rain of the test sample The large amount of water ingress caused by the temperature difference can provide corresponding environmental simulation and accelerated tests for scientific research, product development and quality control.

    Swing tube rain device meets the standard

    The pendulum rain shower device complies with GB4208 enclosure protection level, GB2423.38 “Basic Environmental Test Regulations for Electrical and Electronic Products Test R: Water Test Method”, GB7000 General Safety Requirements and Tests for Lamps, GB4706 General Requirements, GB/T10485 “Exterior of Automobiles and Trailers” National standards such as “Basic Environmental Test of Lighting Devices”.

    The structure and working principle of the rain shower device

    1. The rain test equipment consists of four parts: swing pipe support, swing pipe drive, work rotating table, and electrical control. The support, turntable protective cover and console are made of SUS304 stainless steel hairline board. With pipeline pump and water filter device, equipped with pressure gauge and flow meter.
    2. Worktable rotation: The motor drives the turbine to decelerate and rotate, so as to reach the rotation speed of the worktable.
    3. Swing of the pendulum tube: drive the reducer through a stepper motor, PLC (imported parts), and set it automatically through a programmable logic controller.
    4. Nozzle: Determine the bending radius of the pendulum tube according to the size of the test piece. The nozzle is a detachable special nozzle. The nozzle hole can be replaced at any time according to the standard required hole diameter, so that the ejected water droplets are uniform and the flow rate is sufficient.
    5. Waterway: drainage should be considered for rain showering with open swing pipes, and it should be considered for rapid discharge during civil construction, preferably without water accumulation. In addition, a storage tank of considerable capacity is required to supply the test requirements.

    Operating conditions of the rain shower device

    1. Ambient temperature: 5℃~30℃, ambient humidity: ≤85%R.H.
    2. The machine should not be placed at 80 centimeters at the front, rear, left, and right.
    Because the swing drive motor is exposed to the outside, its waterproof level should not be lower than IPX4. We have a waterproof cover to prevent water from entering the equipment.

    Technical Parameters

    Diameter of spray hole φ0.4mm
    Swing tube radius 1000mm
    Pendulum swing tube 120°、180°、about350°
    Swing tube speed The average swing rate of the swing tube can be adjusted to: about 60°/s (10r/min);
    Rain pressure 80~100KPa(Adjustable)
    Water flow 0.07L/min(Adjustable)
    Test bench size A variety of replaceable supporting tables, including three non-porous circular plates with diameters of 250mm, 550mm, and 1050mm), and two grid plates with diameters of 280mm and 550mm
    Number of spray holes 41-62
    Distance between holes 50mm
    Test bench speed 1-17r/min(Adjustable)
    supply voltage AC380V/50HZ

    PW-RX3 Series Guangdong Yuelian Rain Test Device Chamber Equipment Factory Produce

    Company Profile

    PW Instruments (Guangdong) Co., Ltd is committed to helping customers reach their goals in terms of quality and cost-effectiveness by providing the latest testing instruments as per internationally recognized standards. With an extensive global supply chain in some countries, we are trusted by industry leaders, research scientists and laboratory management managers.

    PW was established in March 2007 by Mr. Peiwu Liu, a senior expert in the field of innovative R/D. Our production base is located in a world-renowned manufacturing area in Dongguan city, Guangdong Province, where the technology boom has attracted a large number of professional engineers and elites.

    In order to better serve customers in East China, PW Instruments (Shanghai) Co., Ltd. was established in Shanghai, and an instrument exhibition hall and testing center were set up in Suzhou Industrial Park. It is an enterprise integrating R&D, production, sales, import and export. It has been recognized by customers for many years. Through years of operation, the company has gathered a group of talents with considerable qualifications in the industry and accumulated a large number of high-quality customers at home and abroad in the past decade.

    PW has its own industrial design capabilities, the appearance and texture of products are good, the measurement and control system department has independent research and development capabilities, and the performance of the developed measurement and control system is stable. It is designed and developed completely in accordance with various national standards, international standards, and industry standards such as GB, ASTM, AATSS, JIS, EN, etc., and is currently used by users in various industries around the world.

    At present, the products developed, produced and sold by the company are divided into three parts: material testing machine division, reliability test chamber division, and measurement division. The products are universal material testing machine, customized tensile and compression testing machine, peel strength testing machine, physical testing equipment, image measuring instrument, 2.5-dimensional, three-dimensional coordinate measuring machine, three-dimensional scanner, full-size measuring instrument, and rapid size measuring instrument, precision oven, high and low temperature test box, constant temperature and humidity test box, rapid temperature change test box, thermal shock test box, walk-in constant temperature and humidity room, UV ultraviolet weathering test box, xenon lamp weathering test box, full sets of test equipment for new energy lithium batteries, etc.

    The products are widely used in automobiles and parts, 3C, smart wear, new energy lithium batteries, molds, casting die-casting, furniture, tape, film, die cutting, packaging, aerospace, scientific research institutions, quality inspection, drug inspection and other fields.

    At this moment, we will not be complacent about our achievements. We will work harder than ever to provide customers with affordable and effective solutions through extensive communication with potential customers around the world to stimulate vitality and enrich experience.

    PW is going to fulfill the ambition and vision to be one of the best manufacturers in the world under the powerful leadership of General Manager Liu.

    PW Test

    PW Test

    Wordshop Equipments

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    Company Pictures

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    Machine Video

    Corporate Culture

    Vision: Become a world-renowned instrument manufacturer
    Mission: Provide customers with high-quality testing equipment
    Values: Customer satisfaction is our aim.

      Reviews

      There are no reviews yet.

      Be the first to review “PW-RX3 Series Guangdong Yuelian Rain Test Device Chamber Equipment Factory Produce”

      Your email address will not be published. Required fields are marked *

      Scroll to Top