PW-VOC1000 Formaldehyde VOC Emission Test/Testing Chamber Machine For Sale

    PW-VOC1000 Formaldehyde VOC Emission Test/Testing Chamber Machine For Sale

     

    Machine Introduce

    The 1 cubic meter formaldehyde VOC emission test climate chamber is mainly used to study the change law of formaldehyde and TVOC emission in man-made panels, interior decoration materials, adhesives, coatings, wallpapers, musical instruments, furniture and electrical and electronic products. To detect the amount of formaldehyde and TVOC released in light industrial products of man-made boards, interior decoration materials, adhesives, coatings, wallpapers, musical instruments, furniture and electrical and electronic products, and classify the detected product grades;

    Feature

    1. Main components: high-quality thermal insulation box, mirror stainless steel test chamber, clean constant temperature, and humidity air supply system, air circulation device, air exchange device, test chamber temperature control unit, signal control, and processing part (temperature, humidity, flow, replacement rate, differential pressure, wind speed, etc.).

    2. Main structure: The inner tank is a mirror stainless steel test chamber, and the outer layer is a thermal insulation box, which is compact, clean, efficient, and energy-saving, which not only reduces energy consumption but also reduces the balancing time of the equipment.

    3. Clean constant temperature and humidity air supply system: an integrated device for high clean air treatment and humidity adjustment, the system is compact, efficient, and energy-saving.

    4. The equipment is equipped with a full protection device and system safety operation protection device, which makes the operation of the equipment more reliable and safe.

    5. Advanced heat exchanger technology: high heat exchange efficiency and small temperature gradient.

    6. Cold and hot against the tempering water tank: the temperature control is stable.

    7. Imported humidity temperature and humidity sensor: the sensor has high precision and stable performance.

    8. High-quality refrigerator: imported refrigerator with stable operation and long service life.

    9. Protection device: The climate box and the dew point water tank have high and low-temperature alarm protection measures and high and low water level alarms.

    10. Protection measures; the compressor also has protection measures for overheating, overcurrent and overpressure, and the whole machine runs safely and reliably.

    11. Stainless steel inner box: The inner cavity of the incubator is made of mirror stainless steel, and the surface is smooth and non-condensing. It is a material with low emission and low absorption, which does not adsorb formaldehyde and volatile organic compounds to ensure detection accuracy.

    12. The constant temperature box body is made of hard foam material, and the box door is made of a silicone rubber sealing strip, which has good thermal insulation performance and sealing performance. The box is equipped with a forced-air circulation device (forming a circulating airflow) to ensure a uniform temperature and humidity in the box.

    13. The equipment adopts the internationally advanced jacket structure, which is compact, clean, efficient and energy-saving.

    Technical Parameters

    Temperature Adjustment range: (20~40)ºC (can be customized)
    Adjustment accuracy: ±0.5ºC
    Relative humidity Adjustment range: (20~80)%RH.
    Adjustment accuracy: ±2%R.H.
    Air replacement rate Adjustment range: 0.5m3~2m3/h (ventilation rate 0.5~2 times/hour) Adjustment accuracy: ±0.05 times/hour, use the touch screen system to set and control the flow through the imported electronic flow controller, automatic detection of feedback flow loss and timely replenishment of flow, accurate and efficient flow control.
    Air circulation The box is equipped with a forced air circulation device (forming a circulation system) to keep the temperature and humidity in the box uniform.
    Surface wind speed The air horizontal velocity is maintained at (0.1~0.3) m/s, and the accuracy is ≤0.05m/s. The box is equipped with an anemometer, and the touch screen system can display and record the wind speed in the box in real time.
    Test cabin size (1±0.02)m3
    The test chamber adopts SUS304 mirror stainless steel plate for internal welding and full welding. The welding and surrounding areas are polished and free of deformation, and all sides and corners are made of a certain arc. It can be washed and cleaned with water, without rubbers and adhesives and other materials that interfere with the detection, the chamber, sealing materials and other devices that come into contact with the air in the test chamber, and do not absorb organic matter and formaldehyde. There is no condensation and condensation in the test chamber. It can be effectively cleaned by washing with water before the test.
    Studio size: 0.80m (width) × 1.0m (height) × 1.25m (depth)
    Control cabin (front view): 2200 (front and rear length) × 2020 (height) × 1200 (width)
    Differential pressure 10±5Pa slight positive pressure, differential pressure is displayed and recorded in real time through the touch screen system
    Air tightness Static leak rate: under 1KPa relative pressure, leak rate ≤ 0.5×10-3m3/min
    Thermal insulation box Polyurethane and insulation board, the outer wall is steel plate, white painted; inner wall: 304 stainless steel plate
    Background concentration Formaldehyde background concentration <0.006mg/m3, TVOC background concentration <0.02mg/m3. Single VOC background concentration <0.002mg/m3
    Clean gas supply system Adopt multi-stage purification (including high temperature catalytic oxidation VOC purification components, low temperature cooling VOC purification components, cold dryer dewatering and oil removal purification components, dust particle filter purification systems, formaldehyde filters and other multiple purification methods
    Recovery rate The average recovery rate of toluene and n-dodecane is not less than 80%
    Air exchange coefficient Not less than 90%
    Main structure The structural arrangement is convenient and reasonable, adapting to various spaces. It not only reduces energy consumption but also reduces equipment equilibration time, improves detection efficiency and reduces detection cost.
    Monitoring equipment The touch control screen is used as the dialogue interface for personnel to operate the equipment, which can directly set and digitally display the temperature, relative humidity, temperature compensation, dew point compensation, dew point deviation, temperature deviation, working time, flow replacement rate, pressure difference, and wind speed in the box. Imported sensors, and can automatically record and draw control curves.
    Monitoring parameters Monitor and display the temperature and humidity in the cabin, switch machine time, flow replacement rate, pressure difference, wind speed, working time, data can be transferred and stored.
    Power The starting power is less than or equal to 3kw, and the operating power is 2kw
    Operating voltage 220V/380V Weight: 800kg
    Equilibrium time The test conditions of the test chamber reach equilibrium within 1 hour after the equipment is started.

    PW-VOC1000 Formaldehyde VOC Emission Test/Testing Chamber Machine For Sale

    Company Profile

    PW Instruments (Guangdong) Co., Ltd is committed to helping customers reach their goals in terms of quality and cost-effectiveness by providing the latest testing instruments as per internationally recognized standards. With an extensive global supply chain in some countries, we are trusted by industry leaders, research scientists and laboratory management managers.

    PW was established in March 2007 by Mr. Peiwu Liu, a senior expert in the field of innovative R/D. Our production base is located in a world-renowned manufacturing area in Dongguan city, Guangdong Province, where the technology boom has attracted a large number of professional engineers and elites.

    In order to better serve customers in East China, PW Instruments (Shanghai) Co., Ltd. was established in Shanghai, and an instrument exhibition hall and testing center were set up in Suzhou Industrial Park. It is an enterprise integrating R&D, production, sales, import and export. It has been recognized by customers for many years. Through years of operation, the company has gathered a group of talents with considerable qualifications in the industry and accumulated a large number of high-quality customers at home and abroad in the past decade.

    PW has its own industrial design capabilities, the appearance and texture of products are good, the measurement and control system department has independent research and development capabilities, and the performance of the developed measurement and control system is stable. It is designed and developed completely in accordance with various national standards, international standards, and industry standards such as GB, ASTM, AATSS, JIS, EN, etc., and is currently used by users in various industries around the world.

    At present, the products developed, produced and sold by the company are divided into three parts: material testing machine division, reliability test chamber division, and measurement division. The products are universal material testing machine, customized tensile and compression testing machine, peel strength testing machine, physical testing equipment, image measuring instrument, 2.5-dimensional, three-dimensional coordinate measuring machine, three-dimensional scanner, full-size measuring instrument, and rapid size measuring instrument, precision oven, high and low temperature test box, constant temperature and humidity test box, rapid temperature change test box, thermal shock test box, walk-in constant temperature and humidity room, UV ultraviolet weathering test box, xenon lamp weathering test box, full sets of test equipment for new energy lithium batteries, etc.

    The products are widely used in automobiles and parts, 3C, smart wear, new energy lithium batteries, molds, casting die-casting, furniture, tape, film, die cutting, packaging, aerospace, scientific research institutions, quality inspection, drug inspection and other fields.

    At this moment, we will not be complacent about our achievements. We will work harder than ever to provide customers with affordable and effective solutions through extensive communication with potential customers around the world to stimulate vitality and enrich experience.

    PW is going to fulfill the ambition and vision to be one of the best manufacturers in the world under the powerful leadership of General Manager Liu.

    PW Test

    PW Test

    Wordshop Equipments

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    Company Pictures

    PW Test

    PW Test

    PW Test

    PW Test

    PW Test

    Machine Video

    Corporate Culture

    Vision: Become a world-renowned instrument manufacturer
    Mission: Provide customers with high-quality testing equipment
    Values: Customer satisfaction is our aim.

      Reviews

      There are no reviews yet.

      Be the first to review “PW-VOC1000 Formaldehyde VOC Emission Test/Testing Chamber Machine For Sale”

      Your email address will not be published. Required fields are marked *

      Scroll to Top